News

Can North Korea open for business?

It’s early days. It was a momentous occasion the meeting between Kim Jong Un and Moon Jae In and here’s hoping for better times for the divided Koreas – to become as one or at least open North Korea to become a more open society. If the change comes about then it can be the difference between the light being on and the light being off. A light – an opening up of their society and markets and the freedom to trade throughout Asia and the world in the future. Why not think like this? Let us change the perception that the kingdom with a mark against it can’t change. That they can be part of a brighter future and that it doesn’t all have to do with the United States. This needs to be the positive message we can all be part of. So, let’s take small steps…let’s not get ahead of ourselves. Let us consider that in the future North Korea can be part of each of our company’s business negotiations through trade, creating opportunities for that country as part of a positive, go-ahead Korea.

Vricon Precision 3D Registration (P3DR) available

Vricon unveiled the next in a series of GEOINT solutions — Vricon Precision 3D Registration (P3DR) — at the year’s GEOINT 2018 Symposium in Tampa, Fla. Vricon P3DR is a software suite designed to automatically georegister imagery, regardless of collection platform, against the most accurate 3D geospatial foundation available, The Globe in 3D. P3DR can be implemented as a real-time processing workflow for imagery feeds without the need for GPS location, heading information, or ground control points. While we’ve always been able to perform georegistration of individual data sets using 3D models as an accurate foundation, Vricon P3DR takes this capability to a whole new level. Users now have multiple options for where and when they can automatically georegister their FMV or other imagery sources in real-time and at an enterprise scale. Precisely locating geospatial data from different sources is a persistent challenge for the geospatial community. Imagery data is collected at different times, on different platforms, and with different look angles, sensor characteristics, and raw pointing accuracies. High-off-nadir Full Motion Video (FMV) is particularly challenging, given the relatively narrow field of view, high resolution, and often poor initial pointing accuracy of the sensors. All of these complexities yield data sets that are significantly misaligned with each other and the real world. The alignment is often off by tens or even hundreds of meters. As a result, users are unable to automatically correlate multi-sensor data, making it difficult to fully leverage collection assets on critical targets. This also creates additional work for analysts, who spend hours trying to align various image sources. Vricon P3DR software — enabled by Vricon’s Globe in 3D — provides a way to quickly and accurately georegister data anywhere on the globe. Vricon P3DR provides critical accuracy enhancements to other ISR sources, enabling GEOINT data to be used to […]

Robot see, Robot do: Bots learn by watching human behaviour

Robots following coded instructions to complete a task? Old school. Robots learning to do things by watching how humans do it? That’s the future. Stanford’s Animesh Garg and Marynel Vázquez shared their research in a talk on “Generalisable Autonomy for Robotic Mobility and Manipulation” at the GPU Technology Conference recently. In lay terms, generalisable autonomy is the idea that a robot can observe human behaviour and learn to imitate it in a way that’s applicable to a variety of tasks and situations. What kinds of situations? Learning to cook by watching YouTube videos, for one. And figuring out how to cross a crowded room for another. Cooking 101 Garg, a postdoctoral researcher at the Stanford Vision and Learning Lab (CVGL), likes to cook. He also likes robots. But what he’s not so keen on is a future full of robots who can only cook one recipe each. While the present is increasingly full of robots that excel at single tasks, Garg is working toward what he calls “the dream of general-purpose robots.” The path to the dream may lie in neural task programming (NTP), a new approach to meta-learning. NTP leverages hierarchy and learns to program with a modular robot API to perform unseen tasks working from only a single test example. For instance, a robot chef would take a cooking video as input and use a hierarchical neural program to break the video data down into what Garg calls a structured representation of the task based on visual cues as well as temporal sequence. Instead of learning a single recipe that’s only good for making spaghetti with meatballs, the robot understands all the subroutines, or components, that make up the task. From there, the budding mechanical chef can apply skills like boiling water, frying meatballs and simmering sauce to other situations. Solving […]

Three game-changers for the manufacturing industry in 2018

Antony Bourne IoT being built into the product design, manufacturers adopting a more service-centric business model, and 3D-printing reaching the tipping point of realizing business benefits on a large scale. These are the three game-changing predictions that Antony Bourne, IFS Global Industry Director of Industrial and High-tech Manufacturing outlines for 2018. 1) By the end of 2018, over 50 percent of manufacturers will be building IoT technology into the design phase of their products. In 2018, IoT will take a decisive step forward in its evolution. If we once thought of IoT as a product’s nervous system, this year will see it grow from picking up signals at the periphery to being the brain of the product, constantly sending, receiving, growing and gathering information, from the center of the product throughout its lifetime, and in the process enabling new services and revenue streams. Manufacturing is undoubtedly heavily impacted by IoT today. According to Global Market Insights, IoT in the manufacturing market was valued at over US$ 20 billion in 2016 and will grow at more than 20 percent up to 2024. Current IoT investments that are unique to the manufacturing environment are taking place in three major initiatives: Smart manufacturing to increase production output, product quality, or operations and workforce safety as well as lower resource consumption Connected products to impact product performance, including collecting detailed information on products in the field, remote diagnostics and remote maintenance Connected supply chains to increase visibility and coordination in the supply chain, tracking assets or inventory for more efficient supply chain execution We will see IoT included as a part of the design process in all three of these IoT initiatives. Manufacturers are realizing that by engineering IoT technology into products and equipment already in the design process, you can monitor not only […]

Konecranes strengthens its bulk handling presence in Japan

Konecranes Gottwald Model 4 Mobile Harbor Cranes handling bulk material. A similar crane will handle coal and coconut husk in the Japanese Port of Miike. Konecranes is supplying an eco-efficient, diesel-electric Gottwald Model 4 Mobile Harbour Crane to Miike Port Logistics (MPL). MPL will begin to operate the crane – which was ordered via Chikuho Seisakusho Co., Ltd. (CS) – at the end of 2018 at its terminal in the Port of Miike. The machine will be dedicated to bulk handling, mainly of coal and coconut husk. MPL has been operating a smaller Konecranes Gottwald Mobile Harbor Crane since 2006. This crane has been handling different types of cargo, including bulk, with a motor grab. Miike’s new mobile harbor crane will replace an ageing bulk gantry crane. Makoto Aso, President, CS, explains: “Bulk handling technology from Konecranes has proven to be very productive and reliable at many terminals around the world. MPL has been very impressed by the performance of their Konecranes cargo handling equipment to date. It was logical to opt for a Konecranes Gottwald Mobile Harbor Crane in order to further expand our bulk handling activities.” Holger Schauer, Regional Sales Manager, Konecranes Port Solutions, says: “We are pleased that the fleet of Konecranes Gottwald Mobile Harbor Cranes at Japanese terminals is growing. Since 2003, we have delivered one Model 2 and nine HMK 170 E mobile harbor cranes, the predecessor of Model 2, to nine terminals around the country. The new crane will be the first Model 4 mobile harbor crane to be operated in Japan.” The four-rope grab crane has a maximum lifting capacity of 95 tons, an outreach of up to 46 metres and a high-performance grab curve. To meet the special requirements in Japan, Konecranes will deliver the crane with an additional overload indicator.

Aurecon strengthens presence in Asia with Centre of Excellence for Digital Engineering

As Asia’s appetite for more future-ready buildings and infrastructure expands, global engineering and infrastructure advisory company Aurecon aims to play a major role in the birth of new ideas to feed this hunger, through its new Singapore-based Regional Centre of Excellence for Digital Engineering. Supported by the Singapore Economic Development Board (EDB), Aurecon’s new Regional Centre of Excellence for Digital Engineering serves as an extension of the company’s Digital Futures team. This Centre is the first of its kind for Aurecon and is dedicated to solving client challenges with emerging digital technologies and alternative business models. “The engineering and construction industry is not spared from digital disruption, which is changing the way we work and live. The decision to extend the Digital Futures team into Asia was driven by increasing regional demand for digital transformation in the building and construction sector. Singapore’s strategic location places our new Centre of Excellence at the epicentre of the Association of Southeast Asian Nations (ASEAN) and within touching distance of North Asia,” said Paul Lombard, Managing Director, Middle East and Asia. Aurecon will invest SGD3 million over the next three years and will focus on three areas: Artificial Intelligence and Data Analytics; the Internet of Things; and Visualisation & Digital Collaboration. Each area of focus will have a dedicated Digital Specialist in charge of consolidating ideas and lessons to support priorities such as urban mobility and infrastructure within Singapore. Once adopted locally, these ideas may then be exported to other parts of Asia, or even the world. The launch of the Centre of Excellence in Singapore is an integral part of Aurecon’s near and long-term business goals in Asia. On the more immediate front, the Centre accelerates the development of digital engineering capabilities for Singapore and the wider Asian market. Building these capabilities in […]

In the firing line

President Donald Trump’s steep tariffs on steel and aluminium imports are now a reality. Trump has imposed a 25% tariff on steel imports and 10% on aluminium, but exempted Canada and Mexico. For American companies that make metals, that’s welcome news. But for businesses that consume steel and aluminium, like automakers and beverage producers, it will likely mean higher prices. Many have warned that could cut into profits and ultimately spur layoffs. Here’s a look at some of the US companies that may be hit by Trump’s latest protectionist move: Anheuser-Busch The aluminium used in beer cans is expected to get more expensive once the tariffs go into effect. Anheuser-Busch(BUD) has warned that it could threaten manufacturing jobs in the industry. The company employs more than 18,000 people in the United States. Auto parts manufacturers The Motor & Equipment Manufacturers Association, which represents companies that make vehicle parts in the United States, has said the tariffs will make cars more expensive and could put the many of the more than 800,000 jobs in its industry at risk. Boeing The nation’s largest single exporter uses aluminium and some steel parts to make planes. Boeing(BA) could also suffer if other countries decide to retaliate against US tariffs by buying planes from competitors like Airbus. The company has more than 140,000 employees in the United States and around the world. Caterpillar Making Caterpillar (CAT) construction equipment could get more expensive if steel and aluminium prices rise. The company employs more than 98,000 full-time workers around the world. About 42,000 are in the United States. Campbell Soup Company Commerce Secretary Wilbur Ross has said that there’s 2.6 cents worth of steel in a can of Campbell’s soup, and consumers can expect prices to rise less than one cent as a result of tariffs. Campbell’s (CPB) responded that “any new broad-based tariffs on imported tin plate steel — an insufficient amount of which is […]

Industrial Software Platform delivers maximum return

Schneider Electric has announced increasing momentum surrounding customer adoption of the company’s Asset Performance Management (APM) solutions, an integral component of the Industrial Software Platform. Through investments in the cloud, advanced machine learning and augmented reality (AR), coupled with new partnerships, the company empowers customers to maximise their return on capital investment and to improve profitability. “Defining and executing an asset performance strategy is a critical component to improving productivity while safeguarding business continuity,” said Kim Custeau, Asset Performance Management Business Lead at Schneider Electric. “We have been delivering proven, industry leading asset performance solutions for nearly 30 years, and continue to invest in a long-term strategy to drive innovation in this area. “Our focus is to provide real value to our customers by empowering them to maximise return on capital investment and improve profitability. We are proud to see our customer results speak for themselves with significant reported savings. “Industrial IoT (IIoT) and Industry 4.0 provide new opportunities to improve overall business performance, particularly for APM. For owner-operators, this includes operational improvements largely involving improved asset reliability,” said Ralph Rio, Vice President Enterprise Software at ARC Advisory Group. “Users have reported that moving from preventive maintenance to predictive or prescriptive approaches provided a 50 percent savings in maintenance labour and MRO materials. With predictive and prescriptive maintenance, near-zero unplanned downtime for critical equipment can be achieved.” Machine Learning and Prescriptive Analytics Machine learning and advanced pattern recognition play a central role within Schneider Electric’s asset performance solutions, enabling customers to more accurately predict – and proactively resolve – issues before they impact their business. This increases reliability, reduces costs and improves safety. Duke Energy prevented an estimated $35 million cost from early warning detection of a steam turbine problem. Ascend Performance Materials now responds faster to alerts with actionable […]

Librestream and Olympus bring remote NDT/RVI experts into the field virtually

Onsight allows customers to share live visuals with remote experts for rapid decision making in the field. Olympus Australia and New Zealand (Olympus) and Librestream Technologies Inc., a leader in remote expert systems for enterprise, are pleased to announce that Olympus is now offering Librestream’s Onsight platform to provide additional functionality to their product portfolio. Using Onsight, Olympus customers in industries including aerospace, manufacturing and oil & gas, can share live visuals from remote visual inspections (RVI) and non-destructive testing (NDT) instruments with remote experts for rapid decision making in the field. “Onsight connects our customers in a way that truly transcends the remoteness we are accustomed to in Australia and Oceania. The ability to instantly share live visuals gives global collaborators a true presence, virtually taking them inside the inspection equipment,” said Brendan Slaven, RVI Product & VM Manager for Maintenance at Olympus. “Librestream complements our technology perfectly with their vast experience in remote collaboration. Onsight brings the experts to you, when you need them, minus the requirement to travel,” Slaven continued. The Librestream solution includes Onsight Connect collaboration software and the Onsight 400R Collaboration Hub device to connect to Olympus videoscopes, ultrasound and other test instruments. Olympus can also provide options to connect a variety of popular virtual reality headsets in order to share visuals in live 3D.

Simplest valve actuators provide automation and production efficiency

By James Maslin National Sales and Marketing Manager for Air Springs Supply Pty Ltd. Australia Rapid and reliable actuation of gate valves is becoming more and more critical to liquid and gas handling applications as industries face the twin demands of production automation and pressure to produce without production interruptions for maintenance. Gate valves, also known as sluice valves, are one of the most widely used types of valves in industrial applications, where they typically operate either fully open or fully closed, being used in pipelines as isolating valves rather than control or regulating valves. Their compact simplicity, low pressure loss, bidirectional versatility and ability to handle full flows where particles cannot cluster has led to widespread use in process engineering applications throughout industries such as food and beverage, agribusiness, manufacturing, mining and mineral processing, liquid-solid separation, filtration, materials handling, water and waste water and waste-to-energy projects. Typically gate valves are manually or (occasionally) hydraulically actuated, but where faster or remote actuation is required, they usually rely on conventional pneumatic actuation using a cylinder with rods and seals. However, an alternative means of actuation is available to process engineers charged with designing pipeline and reticulation systems that respond to the needs of automation and uninterrupted production demands. These flexible-wall, bellows-type Airstroke actuators – manufactured by Firestone and distributed throughout Australia by Air Springs Supply Pty Ltd – are tough, fabric reinforced rubber balloons of different shapes engineered to perform different tasks. The simple single, double and triple-convoluted airbags operate without seals, shafts or internal moving parts to provide ultra-reliable actuation alternatives for materials handling technology exposed to grime, debris and waste, which can disrupt the seals and shafts of convention pneumatic and hydraulic cylinders. Reliability engineered into their DNA Structurally they are identical to the enormously durable and reliable Firestone […]

«‹ 32 33 34 35 ›»

News Ticker

News